Category Archives: Manufacturing Plant

Manufacturing, Manufacturing Plant

Jackson, TN – Machine fire at automotive parts manufacturer suppressed by sprinkler system; Plant reopens next morning

The Jackson Fire Department was called to a fire at the UGN plant Monday after an injection mold machine malfunctioned and caught fire. According to Capt. David Thompson, damage from the fire was contained to the machine itself and its exhaust system. There was minimal damage to the plant, he said.

“It could’ve been [worse],” Thompson said. “If they didn’t have a good sprinkler system, the exhaust goes all the way up to the ceiling so there could have been a fire on the roof real quick. “Everything went the way it was supposed to,” Thompson said.

Thompson said UGN, which makes car parts, had to be shut down for the night, but is expected to be reopen this morning.

Manufacturing, Manufacturing Plant

West Hazleton, PA – Sprinklers assist firefighters in extinguishing fire at manufacturing plant; No injuries

Firefighters from multiple companies responded to a fire alarm at a plant in Valmont Industrial Park in West Hazleton on Sunday afternoon. Firefighters and the plant’s sprinkler system extinguished the fire, which spread to the roof, Cara said. Crews could be found walking on the building’s roof after accessing it from a ladder truck.

Smoke rolled off the roof at Greif Brothers, 95 Jaycee Drive, and was visible for a time from Route 93 after firefighters were dispatched there around 4:30 p.m. The smoke began to dissipate and finally disappeared from outside view by about 5 p.m.

Deputy Fire Chief Brian Cara said crews spotted the smoke upon arrival after being dispatched to the facility by Luzerne County 911 for an activated fire alarm and found a fire in a hopper holding polystyrene.

Cara said firefighters ventilated the building and found the fire didn’t extend elsewhere. Damages amounted to mostly smoke and water, Cara said. He expected the damage would “cause little change” in Greif Brothers operations.

No injuries were reported. Employees were at work when the fire broke out and evacuated, he said.

Cara said multiple fire companies were called to respond as a precaution. With commercial buildings, Cara said, it’s difficult to predict how quickly and where the fire will spread.

Firefighters from Hazleton, Valley Regional, Freeland, McAdoo, Hazle Township and Mahanoy City responded, as did utility companies PPL and UGI. American Patient Transport Systems Inc. also responded, as did fire police to direct traffic.

Manufacturing, Manufacturing Plant

Sun Prairie, WI – Sprinkler system activates; Assists firefighters in fire at aluminum die cast manufacturer

Smoke could be seen from outside the building, and managers told firefighters there was a fire located in an indoor foundry furnace, officials said. The sprinkler system activated before crews arrived, according to the release.

Power was disconnected to all equipment inside, and firefighters put out the fire, officials said. Crews had to overhaul ceiling tiles above the furnace afterwords due to the damage. The fire’s cause and damage estimates are still under investigation.

Madison-Kipp Corporation (“MKC”) is a major producer of precision machined components and system subassemblies for customers in the transportation, industrial, lawn & garden, and leisure-end markets.

 

Manufacturing, Manufacturing Plant

St. Marys, OH – Fire at automotive parts manufacturer AAP put out with help from sprinkler system

The St. Marys Fire Department was called to AAP in St. Marys at about 11:20 this morning due to a ceiling fire in the plant. The department responded with two engines and a ladder track. The department also called in crews from the St. Marys Township Fire Department for assistance. In total, 16 firefighters responded.

Chief Ayres says the fire was put out in about an hour thanks in part to a sprinkler system at AAP. So far, no cause has been determined. Chief Ayres says the department is investigating if this fire is related to a fire at AAP earlier this month that resulted in heavy black smoke and flames shooting from the roof.

 

Manufacturing, Manufacturing Plant

Thunder Bay, ON, Canada – Fire at Bombardier plant controlled by sprinkler system; No injuries

Thunder Bay’s Bombardier plant was forced to evacuate its employees Wednesday afternoon, after a fire broke out inside the facility. The call came in at around 3 p.m.. Thunder Bay fire crews rushed to the plant on Montreal Street, after reports of a structural fire. As it turns out the fire was contained to a piece of equipment. The plant’s sprinkler system was activated and Bombardier staff apparently had the fire out before fire crews arrived.

Hundreds of employees were evacuated as a precautionary measure. There’s no word on how much damage was done to the equipment in the area where the fire started.

Manufacturing, Manufacturing Plant

Clinton, IA – Arson fire extinguished by sprinkler in janitor’s closet at local business

A Clinton man was arrested and charged with arson for his alleged role in a fire at a local business. According to the affidavit, on Sept. 16, at 3:16 a.m., communication dispatched the fire department and police officers to Collis, Inc., at 1710 S. 21st St. in reference to an unknown fire. Boyd, a supervisor at Collis, who was working at the time of the fire, called 911 from his cell phone to report the fire. The firemen arrived and found the fire located in a janitor’s closet. The fire activated the sprinkler system under the stairs and extinguished the fire as the firemen arrived.

The affidavit states that during the investigation of the cause and origin of the fire, investigators observed two possible locations as the cause of the fire. Based on the origin of the fire, investigators determined the fire was intentionally set in the janitor’s closet.

The affidavit continues that during the investigation they were able to identify Boyd as a possible suspect and Boyd was interviewed. During the interview, Boyd allegedly admitted he went into the janitor’s closet to get some garbage cans for his area. Boyd stated that while he was in the closet he used matches to light a box on fire, shut the door and then he left the closet. At the time of the fire, there were approximately 20 other employees in Collis working.

Manufacturing, Manufacturing Plant

Auburn, IN – Fire in paint booth at Cooper-Standard Automotive contained by sprinkler system

Firefighters climb one of the Auburn Fire Department’s aerial ladders to reach the roof at Cooper-Standard Automotive, 207 S. West St., after a fire was reported at 3:05 p.m. Wednesday in a paint booth at the factory. The building’s sprinkler system activated, containing the fire, and firefighters were able to extinguish the blaze using hoses, Auburn Fire Chief Mike VanZile said. All Cooper employees were evacuated from the plant and accounted for, he added. Firefighters declared the situation under control at 3:20 p.m. Garrett firefighters assisted at the scene.

Manufacturing, Manufacturing Plant

Bowling Green, KY – Fire at automotive manufacturer activates sprinkler system; No injuries reported

Firefighters lined the front of NASCO on Nashville Road in Bowling Green Thursday at noon. NASCO said metal dust particles from a worker welding ear the roof line and ventilation fans ignited, setting off the sprinkler system and forcing them to evacuate the building. The Bowling Green Fire Department responded with multiple trucks including a ladder truck. Crews used extinguishers to check the scene for hot spots. NASCO said only a few sprinklers went off during the incident and no one was hurt.

Manufacturing, Manufacturing Plant

Oxford, AL – Sprinkler system holds fire in check at National Gypsum Company facility

Oxford Fire Department responded to a minor fire Tuesday at the National Gypsum Company on U.S. 78. A call first came in about a fire in the plant’s paper bale room around 11:15 a.m. from an employee at the plant, Oxford fire Chief Gary Sparks said in a phone interview Tuesday. Firefighters were on scene within three minutes of the call, extinguished the fire and left the scene by 12:40, Sparks said. It is unclear how the fire started but the sprinkler system held the flames in check until responders arrived on the scene, Sparks said.

“There was minimal damage,” Sparks said. “The majority of it was to the paper bales, but there was some smoke damage in the office area.” There were no injuries reported during the incident and the plant was expected to be up and running before the day ended, Sparks said. Efforts to reach a spokesperson for the plant Tuesday were unsuccessful.

Manufacturing, Manufacturing Plant

Portage, MI – Fire at Pfizer manufacturing facility doused by sprinkler system; No injuries

An “over-pressurization” event led to a fire Saturday that damaged equipment and a section of the Pfizer Inc. manufacturing complex on Portage Road, a Pfizer spokeswoman said Tuesday. Kim Bencker, head of communications for Pfizer Global Supply, previously said no one was injured in the incident, but she could not provide more details.

The incident occurred about 10 a.m. Saturday in Building No. 335. “There appears to have been an over-pressurization event and a fire. The fire was immediately extinguished by the sprinkler in the area,” Bencker said Tuesday in an email response to questions.

The fire damaged equipment and caused “limited building damage,” she said. “No employees were in the area of the building where the incident occurred.” “Most of the building is operating normally, and Pfizer is investigating the cause of the incident,” Bencker said.

Kameron Jordan, Kalamazoo district coordinator for the Department of Environmental Quality, said a small fire in Building No. 335 was reported to the DEQ.

“Because of the possibility that water used to suppress the fire could have resulted in runoff of manganese and/or acetone compounds, the retention pond was tested,” he said. “Neither substance was found to be in excess of background levels of those compounds. A final report will be prepared, and no further response is required.”

Tanya Baker, of the Michigan Department of Licensing and Regulatory Affairs, said the incident was not reported to the state, but such reporting is not required in incidents when no employees were injured.