Manufacturing, Manufacturing Plant Franklin, OH – Fire at manufacturing facility knocked down by sprinklers April 20, 2016 viking210 Arcs from a welder’s torch caused a small fire at a Franklin company Monday afternoon. Franklin firefighters were called to Unifirst, 265 Industrial Drive, at 1:36 p.m. for a fire at the large manufacturing facility. The laundry and uniform company is in the midst of a building expansion according to city officials. Fire Lt. Mike Perry said the a welder was in an area where the expansion and the current building met and dropped arcs between the roof of the two sections onto a maintenance/storage shed that caught fire. Perry said the building’s sprinkler system contained most of the fire, and firefighters put down a small additional amount of water and cleared the building of smoke. He estimated damages of about $5,000 to the structure and about $10,000 to contents stored in the shed.
Manufacturing, Manufacturing Plant Athol, MA – Fire at casket factory extinguished by sprinkler system April 13, 2016 viking210 A fire that broke out at an Athol casket factory Sunday evening is considered suspicious. Athol firefighters received a call around 5:34 p.m. reporting possible smoke and flames at the Cambium Corp. casket factory at 339 Main St. The department responded with two engines, a ladder truck and a command vehicle, and found a smoky odor on arrival, according to a department press release. Smoke was seen on the first floor, but the fire was found to have been extinguished by the building’s sprinkler system. MedStar Ambulance assisted with evacuating one person from the neighboring building as a precaution. Police Lt. Kevin Heath said the fire is being considered suspicious because it started outside the building in a pile of sawdust. Athol police and fire personnel continue to investigate, according to Deputy Fire Chief Jeffrey R. Parker. Orange and Royalston firefighters responded to assist, while Templeton Fire covered the Athol station
Manufacturing, Manufacturing Plant South Bend, IN – Fire at metal finishing business extinguished by sprinkler system March 25, 2016 viking210 The South Bend Fire Department was called to a fire at Pioneer Metal Finishing on Foundation Drive just before 3:30 a.m. Wednesday. When firefighters arrived, they could see smoke inside the building through the windows. They forced their way into the building and discovered the fire had been put out by the building’s sprinkler system. The cause of the fire is under investigation.
Manufacturing, Manufacturing Plant Dandridge, TN – Fire at monofilaments plant extinguished by sprinklers; System credited with averting disaster March 24, 2016 viking210 A fire suppression system averted potential disaster last Thursday afternoon at the Wetekam Monofilaments USA manufacturing facility in Dandridge. Fire Chief Andy Riley reported that the department responded at 12:07 p.m. to a fire alarm at the 93,000 square foot building, where a fire had filled the machine shop with thick smoke. “The visibility was zero inside the building, but we were able to use a thermal imaging camera to determine that the fire had been put out by six sprinkler heads that had been activated.” Based in Germany, Wetekam makes yarns that are used in the weaving, automotive, medical, upholstery, and other industries. The company has over 30 workers locally and invested several million dollars in its plant in the Jefferson County Industrial Park. Riley said all workers were evacuated from the building but were expected to be able to return to work this week since fire damage was contained to the machine shop wall and did not affect the production line. “This was a case where the fire suppression system did the job it was designed to do,” he said. “The back wall was apparently lit up in flames when the call came in, but the sprinklers got it out quickly.” The fire was accidental, but the cause has not been determined, the chief said. No one was injured. The machine shop was unoccupied when the fire started, but employees in the general area reported hearing a crash before smelling smoke, Riley reported. Firefighters were on the scene for about three hours at the 956 Pine drive building clearing smoke from the interior with heavy fans. Firefighters also used a power saw to cut into the rear wall and remove damaged insulation. Volunteer firefighters from Kansas-Talbott and Lakeway Central responded under mutual aid but were diverted to another call in their district, Riley said. New Market and White Pine volunteer firefighters then responded to the Pine Drive location. A total of 22 firefighters worked on the operation. Wetekam, one of the largest monofilament makers in Europe, bought the Dandridge plant two years ago. The company was established in 1965.
Manufacturing, Manufacturing Plant Iowa City, IA – Sprinkler system helps contain fire at auto parts plant March 11, 2016 viking210 A structure fire damaged an Iowa City automotive parts plant and temporarily shut down operations Thursday morning, but no one was hurt, officials said. Iowa City Fire Department Battalion Chief Brian Platz said crews were dispatched to the fire at 11:07 a.m. for a report of smoke coming from the east side of the International Automotive Components building at 2500 Highway 6 in Iowa City. Platz said a fire began in a paint booth in the building and was transmitted through a smokestack to the roof. The fire in the booth itself was contained by the building’s sprinkler system, he said. “Their system extinguished the fire in the booth itself, but it didn’t cover anything above the booth,” Platz said. Crews then used water to extinguish the fire on the roof and in the smokestack, making sure that it would not spread, and Platz said firefighters were able to bring the flames under control using very little water. Thirteen personnel responded to the incident and had the blaze under control within about 40 minutes, according to Platz. And the building’s management was able to evacuate all employees and confirm their safety “very quickly,” he said.
Manufacturing, Manufacturing Plant Celina, OH – Sprinkler system helps contain fire at aluminum products plant March 9, 2016 viking210 A fire broke out at a aluminum plant in Celina Monday afternoon, sending employees home. The fire started at Celina Aluminum Precision Technology, Inc. around 1:30 p.m. The Celina Fire chief said the fire was contained to an area inside the building, between the steel bar joist and the roof. The sprinkler head went off and when firefighters arrived, the fire was out in about 20 minutes. They took care of hot spots for a couple more hours before workers could go back in. Plant officials tell us first shift was sent home, and second shift was cancelled due to the fire. They hoped to have the area checked out and cleared, for third shift to come in and continue operations. The Celina fire chief said the cause of the fire is still under investigation. Plant officials said they needed to check out their equipment before determining the damage.
Manufacturing, Manufacturing Plant Dallas, OR – Sprinklers prevent fire at RV manufacturing plant from spreading March 8, 2016 viking210 The investigation into the cause of today’s fire at Forest River in Dallas is ongoing, but fire officials know one thing for sure: the RV manufacturing plant’s interior sprinklers saved the day. “The sprinkler system, it worked perfectly,” said Fred Hertel, Dallas fire chief. Firefighters were called to the plant, at 1429 SE Uglow Ave., at about 11:55 a.m. By the time fire crews arrived, Forest River’s workers had been evacuated. According to firefighters on scene, the fire appears to have started on the outside of the building – though that hasn’t been officially confirmed yet – and traveled up the wall. The blaze triggered the sprinkler system, which knocked down the fire that had spread to the inside of the building. Hertel said given the size of the building, without the sprinkler system, the fire could have easily gotten out of control. Thankfully, the blaze was contained to one section of the wall on the backside at the plant. “It’s just a little fire,” Hertel said. “The sprinkler system prevented this from getting beyond our capabilities.” NW Natural, Pacific Power, and Polk No. 1 assisted Dallas Fire and EMS on the scene. The Oregon State Fire Marshal’s Office is conducting the investigation
Manufacturing, Manufacturing Plant Burnaby, BC, Canada – Sprinkler system helps minimize fire damage at Serta mattress factory February 12, 2016 viking210 A long-time Burnaby warehouse suffered extensive smoke and water damage last week after a small fire broke out in the building. It was an automatic fire alarm ringing from inside the Serta mattress factory on Winston Street that alerted firefighters of an incident shortly before 4:30 p.m. on Feb. 2, assistant Fire Chief Bryan Kirk told the NOW. When firefighters arrived, there were two employees standing outside, but neither could say why the alarm was going off. “(The firefighters) went inside, and they realized there was something going on, the whole place was full of smoke, so they upgraded it to a second alarm,” Kirk said. The origin of the fire appeared to be a gluing table inside the warehouse, he added. “Between the mattress, the glue and this wooden table, (there was) enough combustibles – that started the fire,” Kirk said. There wasn’t significant fire damage inside the warehouse, thanks to the sprinkler system. Because of the size of the facility, the fire was upgraded to a two-alarm blaze that required about 28 firefighters. Fire crews were on scene until 10 p.m. trying to clear out the smoke. “The whole place was full of smoke, and it makes it that much more difficult to ventilate that much smoke,” he said. “(Firefighters) were there for a good six hours or so, just because it was work intensive getting rid of all the smoke, not so much fighting a fire.” The NOW contacted the manager at the warehouse for more details on the extent of the damage, but calls haven’t been returned yet
Manufacturing, Manufacturing Plant Columbia, MO – Sprinklers suppress fire at rubber products manufacturer; Damage minimized, No injuries February 8, 2016 viking210 The Columbia Fire Department responded to a structure fire at Gates Rubber Corporation Saturday morning at about 10:30. When crews got to the scene, they found that the fire had already been put out by the sprinkler system. Fire officials say the fire was contained to a small area and didn’t cause much damage. Nobody was injured in the fire. The assistant fire marshal was able to determine that the fire was caused by friction on some hand tools. He believes the damages are about $2,000.
Manufacturing, Manufacturing Plant Salina, KS – Compressor fire at cabinet manufacturer put out by sprinkler system February 4, 2016 viking210 A fire in the compressor room at Crestwood caused employees to be evacuated Monday morning and shut down the cabinet-making plant for half the day.Capt. Roger Soldan said firefighters with Rural Fire Department No. 2 responded to the call about 9:10 a.m. at the plant at 601 E. Water Well. Crestwood president Mike Junk said the bearings in the motor of one of three air compressors went out, sparking the fire, which was put out right away by an automatic sprinkler system. Junk said firefighters came through to check for flames and hot spots, and the electricity was shut off while the system was assessed for damage. Junk said the plant was back up and running Monday afternoon, with just the other two air compressors. He said parts have been ordered to repair the third compressor
