Manufacturing, Manufacturing Plant Sun Prairie, WI – Early morning fire at manufacturing plant extinguished by sprinkler system October 16, 2016 viking210 An early morning fire at an industrial plant in Sun Prairie was extinguished by the plant’s sprinkler system, with no injuries reported. The fire happened at about 3 a.m. at Madison-Kipp Corp., 1655 Corporate Center Drive, the Sun Prairie Fire Department said. The department received a water flow alarm from the plant, and when firefighters arrived on scene, they were told by employees that there had been an active fire that was believed to have been put out by the sprinkler system. “The first-in officer confirmed the sprinkler system had activated and put out the fire,” said Fire Chief Chris Garrison. “The fire department performed overhaul to prevent further damage and fire spread.” The fire was contained to one work area in the plant. The cause of the fire is under investigation; no damage estimate was given.
Manufacturing, Manufacturing Plant Gallipolis Ferry, WV – Sprinkler System helps put out fire at chemical plant; No injuries September 8, 2016 viking210 Officials at the ICL-IP America plant in Mason County say a leak occurred in the phosphorous unloading station at around noon Wednesday sparking a fire. The blaze at the Gallipolis Ferry facility was put out by a sprinkler system plant personnel. There were no injuries, officials said. A shelter-in-place covering a two-mile radius was was issued for about 45 minutes before being lifted at just after 1 p.m. A statement from the company it would “investigate the cause and develop preventative actions.” ICL-IP added phosphorous fires create a great deal of smoke. The company reported additional information to the state Department of Environmental Protection’s Division of Air Quality Wednesday afternoon. It said the leak occurred from a trailer-mounted iso-tank. The material was white phosphorous. The company suspects a failed gasket. The DEP has submitted additional questions about the size of the tank and the amount of phosphorous released. Two DEP inspectors, one from the Division of Air Quality and one from the Division of Water and Waste Management’s Environmental Enforcement group, are scheduled to be at the plant site Thursday. The ICL-IP America website produces drilling fluids and flame retardants that are bromine-based.
Manufacturing, Manufacturing Plant Vineland, NJ – Sprinkler system contains building fire started by sparks from a grinder September 7, 2016 viking210 Just after 12:15 p.m. Wednesday, a 911 call summoned firefighters to Rudco Products Inc. for a reported building fire. Firefighters arrived to find smoke seeping from the plant, located at Oak Road and the Boulevard, and the employees evacuated. It appears sparks from a grinder ignited air filters on a nearby storage rack, according to fire reports. The building’s sprinkler system properly activated and contained the fire, which was deemed under control at 12:26 p.m. No injuries were reported. Fire stations 3, 4, and 6 responded to the call.
Manufacturing, Manufacturing Plant Hillsborough, NJ – Sprinkler system helps put out fire at plastic container manufacturing facility September 6, 2016 viking210 A plastic container manufacturing facility in Hillsborough Township was the scene of a two-alarm fire on Monday, which prompted a large response from multiple fire companies in the surrounding area. According to fire officials on the scene at the Tri-Delta Plastics facility on Cougar Court, the incident was first reported at approximately 12:40 p.m. Fire Marshal Chris Weniger said the fire originated from a piece of machinery. “One of the machines caught fire and the flames spread,” Mr. Weniger said. “The fire department arrived and put out the fire with the assistance of the sprinkler system.” No injuries were reported at the scene and officials said the fire was under control by 1:19 p.m. Tri-Delta Plastics, which was purchased by Pretium Packaging in 2014, produces plastic bottles, caps and other packaging products. Mr. Weniger said the piece of equipment that caused a fire was a blow-molding machine. Due to the spillage of chemicals and oils used in that process, the marshal said a hazmat unit was deployed to the scene. “These machines contain cutting oil – different types of oils – and because we used water, the oil is all over the floor,” Mr. Weniger said. Along with all four of the Hillsborough Township Fire companies, personnel from the Fire Marshal’s Office, the Hillsborough Rescue Squad, Millstone Valley Fire Department, the Finderne Fire Department in Bridgewater, the Elizabeth Avenue Fire Company in Somerset and the Manville Fire Department responded to the scene. Though the site is less than a mile away from the scene of a massive fire that took place at Veterans Industrial Park back in February, Mr. Weniger said the response on Monday was no different than any other instance. “With the size of the building and the fact that this happened at a time when our response is not as good – as well as the fact that our firefighters don’t last as long fighting fires in this heat – we ended up calling more people,” Mr. Weniger said. An investigation into the exact cause of the fire is ongoing.
Manufacturing, Manufacturing Plant Pine Grove, PA – Machine fire at textiles plant controlled by sprinkler system August 30, 2016 viking210 Firefighters raced to Guilford Performance Textiles on Saturday afternoon when a machine in the production area caught fire. “An oil separator on the side of a machine apparently broke a coupler and created a fire. For the most part, the sprinkler system did take over but, we had fire in the machine,” Pine Grove Fire Chief Dave A. Sattizahn said. The firm makes and dyes fabric for products ranging from military helmet liners to graduation gowns. The fire was reported to Schuylkill County Communications Center, Pottsville, at 3:11 p.m. Saturday. Area firefighters were dispatched to the factory at 1 Penn Dye St. “It came in as an automatic fire alarm and it was upgraded to a working fire,” Sattizahn said. The fire occurred on the east side of the building. “It was in the last part of their processing area. The plant was on shut down. There was no production going on at the time. But there was a maintenance crew on,” Sattizahn said. Responders included firefighters from Pine Grove, Ravine, Schuylkill Haven and Friedensburg. “It was a machine that’s used for plant production. It’s a machine they run the material through. I think it dries the material. It has a big, hydraulic oil tank on it. And, apparently, one of the couplers broke,” Sattizahn said. “So when the coupler broke, it caught on fire right away. The fire got up above the machine and the sprinkler system kicked in. The sprinkler system did it’s job. But when we got there we got the rest of it out.” Sattizahn said when he entered the building, he saw the machine was on fire. The firefighters managed to keep the fire contained to the building on the far east end of the complex. One of the issues firefighters faced was smoke. “That big building filled up with smoke pretty quick,” Sattizahn said. And the firefighters used draw fans and the operation’s exhaust system to deal with it. The machine sustained fire damage and the building sustained smoke and water damage, the fire chief said. He wasn’t sure exactly why the coupling broke, but said “that oil stays hot all the time in that unit.” And he believe the fire was accidental. The fire was out by 4:30 p.m., he said.
Manufacturing, Manufacturing Plant Temple, TX – Fire at foam products manufacturer controlled by sprinkler system August 23, 2016 viking210 A Temple factory was evacuated early Sunday evening, after some of the foam workers were making caught on fire. It happened at the Carpenter Company on North General Bruce Drive in Temple, shortly after 6:30 p.m. Officials said employees were in the building when that fire broke out, but everyone was evacuated safely. There were no major injuries, however one person was treated for minor smoke inhalation. Firefighters say it took a few hours before they could enter the building. According to Thomas Pechal the Public Information Officer for Temple Fire and Rescue, he said the sprinkler system is what kept the fire from spreading. “Our goal right now is to ventilate the building so we can get the remainder of the foam extinguished and get that out of the building,” said Pechal. There was over 100 pounds of foam material that caught fire, but it didn’t cause any structural damage. Firefighters did eventually enter the building after the ventilation was complete, and they got the fire under control around 8:15 p.m. It is unclear how many employees were working at the time of the fire.
Manufacturing, Manufacturing Plant Bethlehem, PA – Early morning fire at plastics manufacturer doused by sprinkler system August 21, 2016 viking210 An early-morning fire Friday at a plastics manufacturer in Northampton County resulted in minimal damage, thanks to the sprinkler system, an investigator said. The Bethlehem Township Volunteer Fire Co. and township’s Nancy Run Fire Co. responded about 2:40 a.m. to a fire alarm at Alpha Packaging, 1995 Highland Ave. in the township. The incident was quickly updated to a commercial structure fire, township fire Marshal Angela Kelly said. No one was injured in the fire, and the investigation was ongoing into the cause, Kelly said in a news release. “The sprinkler system in the occupancy assisted in controlling and suppressing the fire, resulting in minor damage to the contents,” she stated. “Overhaul was performed by many first responders throughout the early morning hours.”
Manufacturing, Manufacturing Plant Seattle, WA – Fire in paint booth at industrial complex controlled by sprinkler system August 18, 2016 viking210 Firefighters are working to determine the cause of a fire that erupted Saturday at an industrial complex in South Seattle. Witnesses reported seeing flames and smoke seeping from the building’s roof around 3:20 p.m. The business, located in the 400 block of South 96th Street, was not occupied at the time of the fire. There were no reported injuries. Initially, a single fire engine was dispatched. Due to the heat of the flames and the size of the building, however, the call was upgraded to a full response. The fire appears to have started in a paint booth, authorities said. Firefighters reported smoke coming from smoke stacks on the roof of the single-story building and from under several roll-up doors. Upon entering, they found the sprinkler system had controlled the flames. The firefighters extinguished the fire. Twelve sprinkler heads were activated due to the fire and heat. A King County fire investigator is investigating. Multiple departments responded, including personnel from North Highline Fire, Burien, Tukwila, Kent Fire Department, Kent Regional Fire Authority, Seattle Fire, King County Medic One, Rehab One and the King County Sheriff’s Office.
Manufacturing, Manufacturing Plant Steinbach, MB, Canada – Sprinklers extinguish fire in dust collection system at manufacturing facility August 4, 2016 viking210 A fire started in the dust collection system at Loewen in Steinbach. The fire department was dispatched to the scene at 8:26 p.m. Monday evening. Steinbach Fire Captain Russ Reimer says when they arrived on scene alarms were sounding and crews were sent into the building to investigate. “[They found that ] there had indeed been a fire in one of the collection systems, but these systems are also sprinkled so the sprinklers had gone off and done their job.” Reimer says crews then used a thermal imager to ensure the fire was out and no embers had travelled further. He notes they also sent a crew to the north side of the building to ensure the silos were not in danger. Reimer says the sprinkler alarms continued to sound. “The sprinkler alarms will go off when there’s any water flow in the system, and the system was sensing water flow. They may also have a faulty spot in their system right now causing the alarms to want to stay in alarm.” He notes there were employees in the building at the time of the fire but no one was injured and they evacuated when alarms sounded. “I wouldn’t say this is a common occurrence, but when it comes to manufacturing, this is not an unusual thing to have happen, which is why the systems are in place.” The cause of the fire is unknown and Reimer adds, if there is any damage, it’s minimal and most likely appear as water damage from the sprinklers.
Manufacturing, Manufacturing Plant Charlotte, NC – Sprinklers quickly extinguish fire in warehouse containing hazardous materials July 22, 2016 viking210 Firefighters responded to the scene of a 2-alarm hazmat situation Tuesday evening at the Seacon Corporation on John Crosland Junior Way near Wilkinson Boulevard. Firefighters said there were hazardous materials inside the warehouse, so they had to work around those while fighting the fire. Additional firefighters were called in to help because of the heat. There was also a mass casualty bus to keep first responders safe in the heat. Firefighters worked in intervals to make sure there were no issues with the heat. No firefighters were injured. Mecklenburg EMS said one person was taken to Carolinas Medical Center for minor injuries. Charlotte Fire Department said the company was mixing chemicals and there was a little fire and smoke. The sprinkler system quickly put the fire out, but the smoke was a concern.
