Category Archives: Manufacturing Plant

Manufacturing, Manufacturing Plant

Cedar City, UT – Fire sprinkler contains fire at plastics manufacturer

Firefighters from multiple agencies responded Saturday afternoon to a fire at a plastics manufacturing plant in Cedar City.

Genpak, at 2791 Highway 56, produces styrofoam plates for use in restaurants.

Crews were called at 1:43 p.m. after the fire was discovered in the plant’s 20,000-square-foot storage building, which holds “huge rolls of plastic, floor to ceiling,” Cedar City Fire Chief Mike Phillips told Gephardt Daily.

Employees evacuated through the front door of the building and, after a few moments of not being certain that everyone had made it out safely, the facility’s manager informed fire crews that everyone was accounted for.

“That was a relief and made our job easier,” Phillips said.

The major concern was that the area where the fire occurred contains highly flammable materials.

“If we had opened the door to the storage area, the additional oxygen would have caused the fire to spread through the whole structure,” Phillips said. “So we waited to get aerials (trucks) and pressurized the sprinkler system. The sprinkler system did its job.”

Manufacturing, Manufacturing Plant

Bristol, PA – Fire from industrial machine held in check by fire sprinkler system; No injuries reported

Fire crews were at an industrial site in Bristol Township’s Croydon section for a fire Wednesday morning.

Crews from numerous area fire companies were dispatched to Zober Industries on Coventry Avenue at 11:08 a.m. for the fire.

The blaze was in an industrial machine at Zober Industries that separated antifreeze and oil. The blaze was held in check by the building’s sprinkler system, Croydon Fire Company Chief Tom Tryon and Bristol Township Fire Marshal Kevin Dippolito said.

Tryon explained that some of the antifreeze and oil was pushed by water from the fire suppression system into nearby storm drains. The chief said environmental protection officials and the U.S. Coast Guard were alerted of the spill.

No injuries were reported, Dippolito said.

Zober Industries has been a stable in Croydon since the mid-1970s and serves as a vendor that offers custom manufacturing.

Manufacturing, Manufacturing Plant

Amesbury, MA – Fire inside “explosion room” at industrial building put out by fire sprinklers

A regional hazardous materials team responded to an industrial building at 144 Elm St. late Tuesday morning after a flash fire in a room threatened to spread chemicals to the surrounding area.

But, according to Amesbury Fire Chief Ken Berkenbush, sprinkler heads in what he called an “explosion room” at Arc Technologies put out the fire before firefighters arrived about 1:50 a.m.

As a precaution, firefighters from several area communities responded and a stretch of Elm Street near Oakland Street was closed to traffic. The cause of the fire remains under investigation, but Berkenbush said it broke out while workers were moving the contents of one container to another.

Once the hazardous materials team arrived, members inspected the building, conducted air quality readings and performed other tasks to make sure the building was safe.

“Everything came out OK,” Berkenbush said, adding that a worker at the defense industry company sustained minor injuries.

Among those helping local firefighters were units from Newburyport, Newbury, Salisbury, West Newbury and several southern New Hampshire communities. Some of the same departments covered the Amesbury station during the roughly three-hour call and responded to five medical calls, Berkenbush added.

No firefighters were injured.

Manufacturing, Manufacturing Plant

North Okanagan, BC, Canada – Sprinkler system douses fire at pellet plant; No injuries reported

Firefighters in Lavington were called out to an early morning fire at the Pinnacle Pellet plant.

Lavington fire chief Marty Wright told iNFOnews.ca crews got the call 2:45 a.m. today, May 11, and were on site before 3 a.m.

Wright said the fire started in a fan chamber and was quickly doused by the automatic sprinkling system at the pellet plant.

“Pinnacle Pellet’s automated suppression system took care of most the fire for us,” Wright said. “We just got there and took care of the big fire that was in the chamber and then just dealt with hotspots throughout.”

Wright said there were no injuries and everybody is accounted for.

The fire chief said the main fan chamber was completely lost in the fire and the damage is now being accessed by the company.

In a post to Facebook, one eyewitness reported hearing a loud explosion.

Wright said 13 Lavington firefighters and nine from Coldstream responded to the fire. Crews left the scene at around 7 a.m..

Manufacturing, Manufacturing Plant

Monroe, WI – Fire controlled by sprinkler system after explosion at commercial printer

Firefighters responded to an explosion in Monroe early Saturday morning.

According to a Facebook post from the Monroe Fire Department, firefighters were sent to RR Donnelley after the sprinkler system there was activated.

Officials said when firefighter arrived on the scene, they noticed smoke coming from the building, and that some windows were damaged.

The Monroe Fire Department said there had been an explosion in the building which resulted in a fire that activated the sprinkler system.

The fire was controlled by the sprinkler system.

There was some damage to equipment and the building, however the business has sufficient backup equipment to avoid a closure.

The Monroe Fire Department also said the staff at the company worked very well with firefighters to get things quickly resolved and into recovery.

Manufacturing, Manufacturing Plant

Murray, KY – Fire at window plant out out by fire sprinklers; No injuries reported

Major issues were avoided Tuesday morning when a fire occurred inside the Pella Window and Doors plant on Murray’s north side.

Calloway County Emergency Management Director Chesley Thomas said no injuries resulted after the fire was reported at about 10:45 a.m. He said the entire area was evacuated and all workers managed to leave the building without any problems.

“An all clear was given and we had nobody hurt, so they were allowing everybody back into the building,” said Thomas, who arrived at the scene after the fire had been extinguished. He said the fire began in one of the work zones of the plant. “But the sprinkler system did its job.”

Calloway County Fire-Rescue Chief Tommy Morgan said he was the third person from CCFR to arrive on the scene, behind two firefighters who came in their personal vehicles ahead of heavy response units from multiple stations throughout the county. He said that it is believed a Milwaukee battery charger may have developed a short while placed on a shelf, eventually igniting other nearby materials.

“All of the damage was contained to the shelf,” Morgan said. “There also just happened to be a sprinkler head right above it, so when it built up enough heat, that sprinkler came on and pretty much put everything out. We just went in and cleaned everything up a bit and packed everything out. There was still some stuff like paper and cardboard that was still smoldering a little bit, but everything was good, thank goodness.

“It’s been quiet for a long time on the fire side for us, so I was afraid this was going to be a big one, the way (Calloway County Sheriff’s Office dispatch) came out and said they actually had smoke showing.”

Morgan said CCFR has not had an actual building fire since October or November of 2019, but he said it has responded to several brush and woods blazes, as well as wrecks in that time. Even those calls, he said, have become fewer and farther between since mid-March when the COVID-19 pandemic basically brought things to a halt locally.

He said this was very noticeable Tuesday as he responded with his vehicle’s siren and emergency lights activated to Pella.

“I know a lot of people are still going and doing things, but I didn’t have near the trouble you normally do when you go out Fourth Street (in downtown Murray). That’s usually like a madhouse when you’re trying to go out on a call,” Morgan said. “I met like two or three cars. Normally, like I said, it’s a madhouse trying to get up there between meeting people and getting around people. It seems like people are staying in like they should be.”

Morgan said calls to respond to Pella happen every now and then and the vast majority are for false alarms. He said the last time he remembers a call being for an actual fire was in the early 2010s, shortly after he became chief, when an air conditioning unit on top of a warehouse building ignited, with CCFR units  extinguishing that fire.

Morgan said he believes seven or eight CCFR trucks did reach Pella Tuesday, with four or five others that responded, but were called back to their stations after it was determined that enough units were already on the scene. He said 25 to 30 firefighters responded to the call.

Manufacturing, Manufacturing Plant

Wayne, NJ – Fire sprinklers contain fire in manufacturing area of business

On Sunday morning, March 22, Wayne Fire Companies #1 and #2 were dispatched to Mane USA on Demarest Drive in response to smoke and water flow alarms. Mane USA is a global flavor and fragrance manufacturer with a facility in Wayne.

“When the units entered the building, they encountered a moderate smoke condition,” said Wayne Fire Commissioner Bob Minarick. “At that point fire command requested a second alarm which brought Company #5 to the scene.”

Further investigation found a fire in the manufacturing area that was contained by the sprinkler system. Firefighters extinguished the remaining fire and requested Fire Inspection to the scene.

“The fire was contained to a pallet of supplies and also a commercial storage rack that contained production items,” said Minarick. “After viewing security footage, the fire was deemed accidental. Oil and chemical soaked rags and gloves that were stored in a large closed bucket spontaneously ignited and spread to the pallet and rack before the sprinklers held the fire in check.”

Firefighters overhauled the fire area to make sure that all embedded fire was extinguished. Multiple smoke ejectors and the building’s in-house ventilation system were used to clear smoke from the warehouse.

According to Minarick, five fire engines responded to the call with twenty firefighters. The fire was declared under control in 30 minutes.  All units cleared the scene by 10:30am.

“I’d like to thank the Wane Police Department for providing scene and roadway control,” said Minarick. “Also, thanks to the Wayne First Aid Squad for standing by on scene ready to render assistance should one of my firefighters get injured or need medical treatment,”

Manufacturing, Manufacturing Plant

Blaine, WA – Commercial building fire put out by fire sprinklers; No injuries reported

A small fire occurred in a commercial building on Odell Road, but was extinguished by a sprinkler system that prevented any significant structural damage to the building.

On March 1 at about 2 p.m., a fire broke out in a commercial building at 2256 Odell Road in Blaine. The fire occurred in a manufacturing area, and North Whatcom Fire and Rescue (NWFR) was dispatched following an alarm. “We got dispatched to it as a sprinkler/water flow alarm, a fire alarm telling us that the sprinkler system was flowing,” said NWFR division chief and fire marshal Herschel Rostov.

Rostov said that when NWFR firefighters arrived on scene, they found smoke and fire inside the building. However, a sprinkler head had mostly extinguished the fire before it extended very far. Firefighters shut off the water flow, searched the building, determined the extent of damage and ventilated the building to clear the smoke.

“Sprinkler systems can sometimes be an item that building owners find to be very expensive,” said Rostov. “In this case, that single sprinkler head probably kept the whole building from burning down. This is one of those situations where it was very effective and efficient.”

The cause of the fire is still under investigation, Rostov said. He said that the fire appeared to be accidental and that nobody was injured in the incident.

The building is owned by Hugh Wiebe, who said the fire occurred in a space rented to the Bellingham company Cauldron Broths. He said that he is currently working with NWFR to assess the damage, which appears to be limited to smoke damage to some products.

Manufacturing, Manufacturing Plant

Shrewsbury, MA – Fire sprinklers extinguish fire in acid room of manufacturing company

hief James Vuona reports that the Shrewsbury Fire Department responded to a fire at Supercon Inc. on the morning of March 5.

At 3:40 a.m., fire officials received a 911 call indicating there was a fire in the company’s acid room. The acid room contains open top acid tanks where coils of wire are washed as part of the company’s manufacturing process.

Upon arrival at 830 Boston Turnpike, firefighters noticed light smoke in the building’s loading dock area. The building’s fire alarm and sprinkler systems were activated.

Firefighters metered the building’s main entrance, acid room and loading dock for dangerous or explosive gases and used a pole camera to get a visual of the acid room in order to see if a fire could be located. The meter gave negative readings in all parts of the building measured, and the camera showed no visible fire.

Firefighters were then able to enter the building to investigate the acid room and confirmed that the fire had been extinguished by the sprinkler system and that there were no leaking chemicals and no risk of contamination in the room.

The State Hazmat Team was called to the scene and deemed the building clear for operations around 5:30 a.m.

“This fire was quickly extinguished with help from the building’s sprinkler system,” said Vuona. “Thankfully there was no resulting hazmat incident or chemical related fire and the situation was quickly resolved.”

An investigation into the cause of the fire is underway by the Shrewsbury Fire Department and State Fire Marshal’s Office.

Manufacturing, Manufacturing Plant

Winchester, VA – Sprinkler system controls fire at manufacturing plant; No injuries reported

Kingspan Insulation management credits alert employees, the company’s sprinkler system and a prompt response by firefighters for limiting damage from a warehouse fire reported at 6:09 p.m. on Sunday.

Jamey Walters, Kingspan plant manager, said on Monday that Kingspan frequently does emergency preparedness training including fire drills. “We have a very strong safety culture and situations like this show how strong it is,” he said.

No one was hurt in the fire at the plant at 200 Kingspan Way off Martinsburg Pike (U.S. 11). The fire was accidental and occurred during the insulation manufacturing process, according to a news release from Lt. Adam Hounshell, a deputy fire marshal with the Frederick County Fire and Rescue Department. The first firefighters arrived at 6:18 p.m. and found smoke in the warehouse. They extinguished the fire at 6:50 p.m. and removed the burnt insulation. Some of the charred insulation could be seen outside the warehouse on Monday.

Walters said about 130 people work at the 170,000-square-foot facility and about 20 were working when the fire began. He said when the foam insulation caught fire there were “significant flames” that workers tried to put out with fire extinguishers before evacuating when they realized the magnitude of the fire. The sprinkler system then activated and is credited by the fire department for arresting the spread of the fire.

The facility originally opened as Amoco Foam Products and was later purchased by the Pactiv Corp. Kingspan bought the facility in 2014.

Walters said Sunday’s fire was the worst since Kingspan bought the property, but there were a few serious fires in 1990s and 2000s. He said fire is a risk due to the combustibility of insulation.

“Which is why we take fire prevention so seriously,” said Doug Crawford, Kingspan managing director. “It is a real risk.”

A damage estimate was unavailable on Monday. The warehouse, which opened in 1981, is valued at $9.1 million, according to county property records.